FSOK - Your Reliable Sealing Solution Partner

  • FSOK gear case end cover seals NBR End Cap Oil cover
  • FSOK gear case end cover seals NBR End Cap Oil cover
  • FSOK gear case end cover seals NBR End Cap Oil cover
  • FSOK gear case end cover seals NBR End Cap Oil cover
  • FSOK gear case end cover seals NBR End Cap Oil cover
FSOK gear case end cover seals NBR End Cap Oil cover
FSOK gear case end cover seals NBR End Cap Oil cover
FSOK gear case end cover seals NBR End Cap Oil cover
FSOK gear case end cover seals NBR End Cap Oil cover
FSOK gear case end cover seals NBR End Cap Oil cover
+

Share to

FSOK gear case end cover seals NBR End Cap Oil cover

EC end cap oil seal is a mechanical component used for sealing rotating shafts.

Still deciding? Get samples first,  Contact US !

View similar products

  • Product Description
  • Product Introduction

    EC end cap oil seal is a mechanical component used for sealing rotating shafts, mainly installed at the end cap of motors, reducers or other transmission equipment, to prevent lubricating oil leakage and block external dust, moisture and other pollutants from entering the interior of the equipment. Using high-quality materials and precision craftsmanship to ensure long-term stable sealing performance.

    Product Features

    1. High performance materials
    ● Sealing lip: Nitrile rubber (NBR), fluororubber (FKM) or polyurethane (PU), resistant to oil, high temperature, and wear.
    ● Metal skeleton: galvanized steel or stainless steel, enhancing structural strength.

    2. Optimize design
    ● The spring-loaded lip design ensures that the shaft fits tightly at different speeds.
    ● Dust proof secondary lip structure (optional), dual protection extends equipment life.

    3. Wide applicability
    ● Working temperature: -40 ℃~+150 ℃ (depending on the material).

    4. Durability
    ● Low friction coefficient, reduces shaft wear, and has a long service life.

    Application area

    ● Industrial motors, reducers, gearboxes
    ● Hydraulic pump, compressor
    ● New energy vehicle drive system
    ● Agricultural machinery and engineering equipment

    Installation precautions

    1. Clean the shaft and end cover before installation to ensure there are no burrs or impurities.
    2. Apply lubricating grease to the shaft and oil seal lip to avoid dry friction.
    3. Use specialized tools to evenly press in, and do not strike or tilt during installation.
    4. After installation, check if the lips are curled or deformed.

Factory

FSOK gear case end cover seals NBR End Cap Oil cover


EC end cap oil seal is a mechanical component used for sealing rotating shafts.

Still deciding? Get samples first,  Contact US !

Product Catalog

Recommended similar products


ONLINE MESSAGE

Attention: Please fill in the information accurately and keep communication open. We will contact you as soon as possible


Business license